Basic Operation; I Channel Selection - Icom IC-M302 Instruction Manual

3

BASIC OPERATION

I Channel selection

ï ï Channel 16
Channel 16 is the distress and safety channel. It is used for
establishing initial contact with another station and for emer-
gency communications. Channel 16 is monitored during both
Dualwatch and Tri-watch. While standing by, you must moni-
tor Channel 16.
➥ Push [16•
] momentarily to select Channel 16.
9
➥ Push [CH/WX•
DUAL
ing Channel 16, or push [Y] or [Z] to select operating chan-
nel.
Push
6
] to return to the condition before select-
Scrolls
ï ï Channel 9 (Call channel)
Each regular channel group has a separate leisure-use call
channel. The call channel is monitored during Tri-watch. The
call channels can be programmed (p. 9) and are used to store
your most often used channels in each channel group for
quick recall.
➥ Push [16•
] for 1 sec. to select the call channel of the se-
9
lected channel group.
• "CALL" and call channel number appear.
• Each channel group may have an independent call channel after
programming a call channel. (p. 9)
➥ Push [CH/WX•
] to return to the condition before se-
DUAL
lecting call channel, or push [Y] or [Z] to select an oper-
ating channel.
Push
for 1 sec.
Scrolls