I Position Indication - Icom IC-M302 Instruction Manual

6
DSC OPERATION
D Deleting Address ID/Group ID
q Push [DSC•
] to enter the DSC menu.
POS
w Push [Y] or [Z] to select "
e Push [Y] or [Z] to select "
• When no address ID is programmed, "
r Push [Y] or [Z] to select the desired ID name for deleting
and push [DSC•
POS
• " " appears.
t Push [DSC•
POS
DSC menu.
16
" and push [DSC•
Scrolls
", then push [DSC•
" is displayed.
].
] to delete the address ID and exit the

I Position indication

].
When a GPS receiver (NMEA0183 ver. 2.0 or 3.01) is con-
POS
nected, the transceiver indicates the current position data in
seconds of accuracy.
An NMEA0183 ver. 2.0 or 3.01 (sentence formatters RMC,
GGA, GNS, GLL) compatible GPS receiver is required. Ask
your dealer about suitable GPS receivers.
].
POS ➥ Push [DSC•
• 'Latitude' and 'Longitude' scroll in sequence at the channel com-
ment indicator.
• "
• When connecting GPS receiver is compatible with sev-
eral sentence formatters, the order of input precedence
is 'RMC,' 'GGA,' 'GNS' and 'GLL.'
• "GPS" blinks when the GPS data is invalid.
] for 1 sec. to display the current position.
POS
" scrolls when no GPS is connected.
Scrolls