Icom IC-M302 Instruction Manual page 36

7
SET MODE
D D DSC watch
DSC watch monitors Channel 70 while you are receiving an-
other channel.
If a distress signal is received on Channel 70, the transceiver
monitors Channel 16 and 70 alternately until the distress sig-
nal disappears. If a signal is received on another channel,
DSC watch pauses until the signal disappears.
This function may not be available for some channel
groups depending on dealer setting.
•
" " scrolls at the channel comment indicator.
DSC watch OFF (default)
D D Beep tone
You can select silent operation by turning beep tones OFF or
you can have confirmation beeps sound at the push of a key
by turning beep tones ON.
Beep tone ON (default)
30
Scrolls
DSC watch ON
Beep tone OFF
D D Automatic acknowledgement
This item sets the Automatic acknowledgement function ON
or OFF.
When Position Request or Position Report call is received,
transceiver automatically transmits Position Request Reply or
Position Report Reply, respectively.
•
" " scrolls at the channel comment indicator.
Auto acknowledgement
OFF (default)
Scrolls
Scrolls
Auto acknowledgement
ON
Scrolls