To Initialize Agilent B2200; To Enable Light Pen; To Change Channel Configuration Mode - Agilent Technologies B2200A User Manual

NOTE
Front Panel Operation
Operation

To Initialize Agilent B2200

1. Press the key and the
Shift
2. Press the arrow key to displays YES, then press the
Agilent B2200, or press the

To Enable Light Pen

Turn the Agilent B2200 off, and connect the light pen to the Light Pen connector at
the right down corner of the front panel. After that, perform the following procedure
to enable the light pen.
1. Press the key. The setup menu will be displayed on the LCD.
Menu
2. Press the arrow key to move the cursor to PEN, then press the
3. Press the arrow key to display ENABLE, then press the
light pen, or press the
Light Pen
You can control the Agilent B2200 functions and the switch connections by using
the front panel keys. And the Agilent B2200 allows you to use the Agilent 16443A
Light Pen to control the switch connections.
Pointing a LED on the LED matrix by using the light pen controls the setting of the
switch specified by the LED.

To Change Channel Configuration Mode

1. Press the key and the
Shift
(AUTO or NORMAL).
2. Press the arrow key to select the mode, then press the
displays NO.
3. Press the arrow key to display YES, then press the
key to cancel this operation.
Changing the channel configuration mode resets the Agilent B2200.
3-4
key. Then the LCD will display NO.
Local
key to cancel initialization.
Exit
key to cancel changing the setup.
Exit
key. The LCD displays the present setting
Bias Mode
Agilent B2200 User's Guide, Edition 2
key to initialize the
Enter
key.
Enter
key to enable the
Enter
key. The LCD
Enter
key. Or press the
Enter Exit