Scan Operation; Scan Types - Icom IC-Q7A Instruction Manual

Scan types

FULL SCAN (p. 16)
30 1300
MHz MHz
Scan
Jump
PROGRAMMED SCAN
(p. 16)
Band Band
Scan edges
edge edge
Scan
Jump
MEMORY BANK SCAN
(p. 16)
Not yet
programmed
ch 1 ch 2 ch 3
ch 0
ch 4
SKIP
ch 99 ch 6 ch 5
Repeatedly scans all fre-
quencies over the entire
band.
U.S.A. version cannot
receive some frequencies.
Repeatedly scans between
two user-programmed fre-
quencies. Used for checking
for frequencies within a
specified range such as
repeater output frequencies,
etc.
Repeatedly scans memory
channels except skip chan-
nels within memory bank 0
(memory channels 0–99) or
memory bank 1 (memory
channels 100–199).

SCAN OPERATION

Up to 20 programmed scan ranges, full scan, band scan and
memory bank scan provide scanning versatility. Each scan
can have skip channels programmed.
SELECTED BAND SCAN
(p. 16)
Band Band
edge
edge
Scan
Jump
MEMORY SKIP SCAN (p. 16) Repeatedly scans all mem-
Not yet
programmed
ch 1 ch 2 ch 3
ch 0
ch 4
SKIP
ch 199 ch 6
ch 5
FREQUENCY SKIP
FUNCTION (p. 19)
Band edge or Band edge or
scan edge scan edge
Scan
Skip Skip
Jump
6
Repeatedly scans all fre-
quencies over the entire
selected band.
ory channels except skip
channels.
Skips unwanted frequen-
cies that inconveniently
stop scanning. This func-
tion can be turned ON and
OFF in expanded set
mode.
15