I Options - Icom IC-2720H Instruction Manual

• Squelch sensitivity † : Less than 0.13 µV
(threshold)
• Selectivity † (typical) :
Wide
Narrow
(USA only)
• Spurious and image rejection † : More than 60 dB
• AF output power † : More than 2.4 W
(at 13.8 V DC)
• Ext. speaker connectors : 3-conductor 3.5 (d) mm (
† Guaranteed 144–148 MHz and 430–440 or 440–450 MHz ranges only.
All stated specifications are subject to change without notice or obligation.

I Options

HM-133 -
REMOTE CONTROL MICROPHONE
Wired remote control microphone with key backlight. Same as that
supplied with the transceiver.
HM-118TAN/TN
DTMF MICROPHONE
HM-118N
HAND MICROPHONE
HS-62
FLEXIBLE MOBILE MICROPHONE
+ OPC-589
ADAPTER CABLE
For all-round mobile operation.
OPC-1154/OPC-1155
SEPARATION CABLES
A ferrite core is supplied with the OPC-1155 for the USA version.
Same as that supplied with the transceiver. 3.5 m (11.5 ft)
OPC-1156
CONTROLLER EXTENSION CABLE
Extends the supplied separation cable 3.5 m (11.5 ft)
More than 12 kHz/6 dB
Less than 30 kHz/60 dB
More than 6 kHz/6 dB
Less than 20 kHz/60 dB
at 10% distortion with an
8 Ω load
")/8 Ω
1
⁄
8
+ HS-15SB
SWITCH BOX
SPECIFICATIONS AND OPTIONS
MB-84
REMOTE CONTROLLER BRACKET
Same as that supplied with the transceiver.
MB-85
COMBINATION BRACKET
Used for single-body installation. 20 cm (7
is supplied.
MB-65
MOUNTING BASE
Mounts the remote controller on to variety of place in vehicle. MB-84
is required for mounting.
MB-17A
MOBILE MOUNTING BRACKET
One-touch bracket. Transceiver main unit easily attached or re-
moved.
OPC-440/OPC-647
MIC EXTENSION CABLES
OPC-440: 5.0 m (16.4 ft); OPC-647: 2.5 m (8.2 ft)
OPC-441
SPEAKER EXTENSION CABLE
5.0 m (16.4 ft)
SP-7/SP-10
EXTERNAL SPEAKERS
SP-7: For base station use. Cable length: 1.0 m; 3.3 ft
SP-10: For all-round mobile operation. Cable length: 1.5 m; 4.9 ft
OPC-347/1132
DC POWER CABLES
OPC-347: 7.0 m (23 ft)
OPC-1132: 3.0 m (9.8 ft) Same as that supplied with the transceiver.
CS-2720
CLONING SOFTWARE
Provides quick and easy programming items, such as memory chan-
nels, set mode contents for local repeater frequencies, via PC's USB
terminal. RS-232C type cloning cable, OPC-478, also available.
OPC-474
CLONING CABLE
Used for data cloning between transceivers.
13
7 ⁄
in) remote control cable
8
+ OPC-478U
CLONING CABLE
13
76