Icom IC-2720H Instruction Manual page 17

Using the HM-133
q In VFO mode, set the desired operating frequency, includ-
ing offset direction, tone settings, etc.
➥ Push [VFO/LOCK] to select VFO.
➥ Push [
C(T-OFF)] first, then enter the desired oper-
ENT
ating frequency via the keypad.
• Set other data, such as repeater tone, duplex information,
tuning step, if necessary.
w Push [FUNC] then [
A(MW)].
CLR
• "!" indicator and memory channel number blink.
Push
then
e Push [Y]/[Z] to select the desired memory channel.
r Push [FUNC] then push [
gram.
• 3 beeps sound
• Memory channel number automatically increases when continu-
ing to push [ A(MW)] after programming.
CLR
MAIN
, T X
M
A(MW)] for 1 sec. to pro-
CLR
QUICK REFERENCE GUIDE
XII