Confidential And Other Held Jobs Do Not Print; Job Takes Longer Than Expected To Print - Ricoh InfoPrint 1759 User Manual

Ibm infoprint 1759: user guide
Hide thumbs Also See for InfoPrint 1759:
Table of Contents

Advertisement

Check to see if the paper tray is empty
Load paper in the tray.
Make sure the correct printer software is installed
Verify that you are using the correct printer software.
If you are using a USB port, make sure you are running Windows Vista, Windows XP, Windows Server 2003,
or Windows 2000/Me/98 and using compatible printer software.
Make sure the internal print server is installed properly and working
Make sure the internal print server is properly installed and that the printer is connected to the network.
Print a network setup page and check that the status shows Connected. If the status is Not Connected, check
the network cables, and then try printing the network setup page again. Contact your system support person to
make sure the network is functioning correctly.
Make sure you are using a recommended USB, serial, or Ethernet cable
For more information contact the place where you bought the printer.
Make sure printer cables are securely connected
Check the cable connections to the printer and print server to make sure they are secure.
For more information, see the setup documentation that came with the printer.

Confidential and other held jobs do not print

These are possible solutions. Try one or more of the following:
Has a formatting error occurred?
If so, delete the job and try printing it again. Only part of the job may print.
Make sure the printer has sufficient memory
Free up additional printer memory by scrolling through the list of held jobs and deleting some of them.
Check to see if the printer has received invalid data
Delete invalid jobs.

Job takes longer than expected to print

These are possible solutions. Try one or more of the following:
Reduce the complexity of the print job
Eliminate the number and size of fonts, the number and complexity of images, and the number of pages in the job.
Change the Page Protect setting to Off
1
Make sure the printer is on and Ready appears.
2
On the home screen, touch
3
Touch Settings.
4
Touch General Settings.
5
Touch
repeatedly until Print Recovery appears.
.
234

Advertisement

Table of Contents
loading

Table of Contents