IBM TransNote Hardware Maintenance Manual page 65

Removing and replacing a FRU
DIMM installation notice:
With the notched end of the DIMM toward the socket,
insert the DIMM at an angle of about 25 degrees, into the
socket 1 ; then press it firmly. Pivot the DIMM until it
snaps into place 2 . Make sure that the card is firmly
fixed in the slot and does not move easily.
DIMM cover installation notice:
Attach the latch of the cover firmly by pressing the part
shown in the following figure, and then tighten the screw.
61
ThinkPad TransNote