Installer Checklist - Fisher & Paykel DCS 30 BGC Installation Manual/User Manual

INSTALLATION

INSTALLER CHECKLIST

 o Specified clearances main-
tained to combustibles.
 o Verified proper enclosure
ventilation.
 o All internal packaging and
any adhesive residue
removed. To remove stub-
born residue, use rubbing
alcohol or a commer-
cially available adhesive
remover.
o Knobs turn freely, bezels
centered.
 o Each burner lights satis-
factorily
NOTE:
If any of the listed items are missing, contact DCS at (888) 936-7872. Please be prepared with your
Model #, Serial # and description of item(s) that are missing.
Read all installation instructions in this manual to see if the unit has been properly installed. If not done or
done correctly, correct before using the unit.
 o Air shutters adjusted.
 o Low flame setting satis-
factory.
 o Drip pan in place properly
and sliding freely.
 o Pressure regulator con-
nected and set for 4.0"
W.C. Natural, 11.0" W.C. LP
gas.
 o Manual shut-off valve
installed and accessible.
 o Unit tested and free of
leaks.

19
 o User informed of gas
supply shut-off valve
location.
o All radiants are assembled
and put in place.
o Check match lighting.
PLEASE LEAVE THESE
n
INSTRUCTIONS WITH THE
USER.
USER, PLEASE RETAIN
n
THESE INSTRUCTIONS
FOR FUTURE REFERENCE.
Tag location of
Model # and Serial #
EN