Fisher & Paykel DCS 30 BGC Installation Manual/User Manual page 13

INSTALLATION
BUILT–IN CONSTRUCTION DETAILS
Access Drawers
Cutout dimensions
A
90º
FIG. 05
NOTE: The cutout of each corner should be 90
drawers to fit properly.
* The enclosure should have ventilation holes to prevent gas build-up in the
event of a leak. Refer to ANSI Z21.58 Standard for Outdoor Cooking Gas
Appliances, Section 1.7 Enclosures For Self Contained LP-Gas Supply Systems.
** For proper support and drawer operation, insure that support boards are
installed per Installation Guide instructions
MODEL NUMBER A
(+0,-1/8)
ADR2- 48 46"
ADR2-36 34"
ADR2-30 28"
ADR2-24 22"
To order access drawers or doors, please call DCS Customer Care at 1.888.936.7872 for DCS Dealer in your area.
Vent*
B
Optimal support
location**
angle in order for the access
º
B C
(+1/8,-0)
20" 24-1/2"
(Min,
20"
20" All
20" Models)
Access Doors
Cutout dimensions
90º
Cutout for Access Doors
NOTE: The cutout of each corner should be 90
for the access drawers to fit properly.
* The enclosure should have ventilation holes to prevent
gas build-up in the event of a leak. Refer to ANSI Z21.58
Standard for Outdoor Cooking Gas Appliances, Section 1.7
Enclosures For Self Contained LP-Gas Supply Systems.
MODEL NUMBER
ADN1-20x48
ADN1-20x36
ADN1-20x30
ADN1-20x24
11
A
B
FIG. 06
angle in order
º
A B
(+0,-1/8) (+1/8,-0)
46" 20"
34" 20"
28" 20"
22" 20"
EN
Vent*