Download Print this page

Fisher & Paykel OR30S Gas Gas Installation Manual page 5

Gas & dual fuel
Hide thumbs Also See for OR30S Gas Gas:

Advertisement

Available languages

Available languages

Anti-tip bracket (1)
Small screws and
washers (2)
3
IMPORTANT!
THIS APPLIANCE MUST BE INSTALLED BY A QUALIFIED INSTALLER.
Improper installation, adjustment, alteration, services, or maintenance can cause injury or property damage.
Consult a qualified installer, service agent, or the gas supplier.
The use of suitable protective clothing/gloves is recommended when handling or installing this appliance.
Screwdriver
2 – Wrench
2
PARTS SUPPLIED FOR INSTALLATION
Bolt (1)
Threaded nuts (2)
Wood screws (8)
TOOLS NEEDED FOR INSTALLATION (NOT SUPPLIED WITH THE APPLIANCE)
T-handle
Pencil
Tape measure
wrench
Screws and plastic
Pressure regulator (1)
sleeve anchors (8)
Suitable
Hammer
protective gloves
1/2" (12.7mm) NPT
Ground lead*
connector and
(3 wire permanent
gasket (1)
connection)
*Can be used in US only, for Canada it is mandatory to
connect the range by using cordset with plug supplied.
Adjustable
Adjustable
wrench
pliers
Cupped washer*
(4 wire permanent
connection)
Drill
5

Advertisement

loading