Installing The Switch Chassis; Safety - Cisco Nexus 93108TC-FX3 Hardware Installation Manual

Installing the Switch Chassis

•
•
•
•
•
•
•
•
•
•

Safety

Before you install, operate, or service the switch, see the Regulatory, Compliance, and Safety Information for
the Cisco Nexus 3000 and 9000 Series for important Safety Information.
Warning
Safety, on page 11
Installation Options with Rack-Mount Kits, on page 15
Airflow Considerations, on page 15
Installation Guidelines, on page 15
Unpacking and Inspecting the Switch, on page 16
Installing the Switch Using the NXK-ACC-KIT-1RU Rack-Mount Kit, on page 17
Installing the Switch into a Two-Post Rack Using the NXK-ACC-KIT-1RU Rack-Mount Kit, on page
20
Installing the Airflow Sleeve (N9K-AIRFLOW-SLV), on page 24
Grounding the Chassis, on page 25
Starting the Switch, on page 26
Statement 1071 Warning Definition
IMPORTANT SAFETY INSTRUCTIONS
Before you work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar
with standard practices for preventing accidents. Read the installation instructions before using, installing, or
connecting the system to the power source. Use the statement number provided at the end of each warning
statement to locate its translation in the translated safety warnings for this device.
SAVE THESE INSTRUCTIONS
Cisco Nexus 93108TC-FX3 ACI-Mode Switch Hardware Installation Guide
3
C H A P T E R
11