Initializing This Unit - Marantz SR7013 Service Manual

POST-SERVICE PRECAUTIONS

Initializing this Unit

Make sure to initialize this unit after replacing the microcomputer or any peripheral equipment, or the
digital PCB.
1. Press the power button to turn off the power.
2. While holding down buttons "MOVIE" and "MUSIC" simultaneously, press the power button to turn
on the power.
3. Release the buttons after confirming that the display flashes at 1-second intervals.
＊ The unit is initialized.
Use network initialization mode to initialize the network related settings.
NOTE： • If the unit fails to enter the service mode in step 3, repeat the procedure from step 1.
• Initializing the device restores the customized settings to the factory settings. Write down
your settings in advance and reconfigure the settings after initialization.
X MOVIE MUSIC
JIG FOR SERVICING
Use the following jigs (extension cable kit) when repairing the PCBs.
Order with your dealer for the jigs your dealer if necessary.
8U-110084S : EXTENSION UNIT KIT :
8U-110136S : EXTENSION UNIT KIT :
900639103810S : JIG 29P EXTENSION CABLE :
s
(See JIG FOR SERVICING)
1 Set
1 Set
1 Set
7