Marantz SR7013 Service Manual page 157

3-5. TUNER STEP mode (U / N only)
3-5.1. Actions
This is a special mode for enabling reception STEP of the ANALOG TUNER to be changed.
3-5.2. Starting up
While holding down buttons "ZONE SELECT" and "BACK" simultaneously, press the power button to
turn on the power.
Select the "5. TUNER FRQ SET" using the "CURSOR f / d " button, then press the "ENTER" button to
confirm.
3-5.3. Displays
Start up this unit in TUNER STEP mode, select the desired option using the "CURSOR 0 / 1 " button,
then enter using the "ENTER" button.
The following information is displayed in the following order.
(1) AM9 kHz / FM50 kHz is selected
L1
*TUNER FRQ Set
L2
< AM9/FM50 >
"CURSOR 0 " "CURSOR 1 "
(2) AM10 kHz / FM200 kHz is selected
L2
< AM10/FM200 >
"ENTER"
(3) Press the power button to turn off the power.
(4) Press the power button to turn on the power.
157