Print Head Cleaning - AGFA Drystar 4500 User Manual

D 4500 U
RYSTAR SER MANUAL

Print head cleaning

Print head cleaning must be done when image quality problems occur. For
more information on maintaining image quality, refer to
quality and resolving image quality problems'
Reference manual.
Press the Key-operator key to enter the Key-operator mode.
1
Press the Down key five times, followed by the Confirm key to select
2
'Calibration'.
The 'Select Calibration' screen appears:
In case the printer is in printing mode, a screen will be presented that the
calibration cannot be done now, but has to be reactivated later.
Press the Down key two times to select 'Print head cleaning' and press the
3
Confirm key. The printer will automatically shut down.
The 'Print head cleaning' screen will give instructions on what to do:
4
64
Advanced operation (key-operator mode)
'Maintaining image
on page 191 of the Drystar 4500
2801E EN 20050215