Table of Contents
Advertisement
Remove the plastic bag with the film pack from the film box.
5
Open the plastic bag and take the film pack.
6
Place the new film pack in the film tray.
7
Make sure that the sheet labeled "This side down" is at the bottom of the film pack
when it is loaded.
Make sure not to load more than one film pack in an input tray. Loading
more than one film pack in an input tray may damage the Drystar 4500.
2801E EN 20050215
D
4500 U
RYSTAR
SER MANUAL
Basic operation (operator mode)
45
Advertisement
Table of Contents
