Table of Contents
Advertisement
D
4500 U
RYSTAR
SER MANUAL
Remove the perforated protective sheet from the input tray.
3
LOAD <Film Type Description>
Open a film pack, making sure that the film type corresponds with both:
4
The film type description on the display (refer to the screen above).
•
The film type as indicated on the label on the film tray.
•
DRYSTAR DT 1 B 8x10"
You can find the film type on the film packaging. The label may show some
additional characters after the film type, e.g. 'DRYSTAR DT 1 C'. Those characters
are not relevant for the printer settings, and you can ignore them.
When you have to load a film of another type, you will have to change the film type
settings first.
Reference manual.
44
Basic operation (operator mode)
'Changing the configuration settings'
Blinking
on page
56
of the Drystar 4500
2801E EN 20050215
Advertisement
Table of Contents
