Contents; Assembly; Install Blower Pipes - Shindaiwa P45214001001 Operator's Manual

CONTENTS

CONTENTS
The Shindaiwa product you purchased has been factory pre-assembled for
your convenience. Due to packaging restrictions, some assembly may be
necessary.
After opening the carton, check for damage. Immediately notify your retailer
or Dealer of damaged or missing parts. Use the contents list to check for
missing parts.
1 Power Head
1 Flex Pipe
1 Pipe with Swivel
1 Straight Pipe
1 Straight Pipe with Decal
1 Operator's Manual
1 Warranty Statement
2 Clamps with Screws

ASSEMBLY

Never perform maintenance or assembly procedures with
engine running or serious personal injury may result.

Install Blower Pipes

1. Assemble clamps (A) and (G)
onto both ends of flexible pipe
(B).
Note: Clamp with cable guide
loop (G) fits elbow end of
flexible pipe.
16
EB600RT
B
G
X7505200806
© 11/19 ECHO Incorporated
A