Table of Contents
Advertisement
Optional Fan Components
Gripple
®
No. 4 Gripple
®
GUY WIRE
No. 4 GRIPPLE
CONNECTOR
®
Quick Link (4)
I-Beam Hardware Kit (Optional)
GUY WIRE CLAMP BOLT
GUY WIRE CLAMP ASSEMBLY
I-Beam Mounting
QUICK LINK
GUY WIRE
GUY WIRE CLAMP BOLT
I-Beam Clamping
Plate (2)
GUY WIRE CLAMP ASSEMBLY
3/8 in. – 16 Grade 5, Nylon Locknut (4)
QUICK LINK
3/8 in. – 16 x 2 in. Grade 5, Hex Bolt (4)
GUY WIRE
I-BEAM CLAMPING PLATE SHIM
UNIVERSAL MOUNTING PLATE
Required Tools
1/2 in. WASHER
1/2 in. - 13 GRADE 8 NYLON LOCKNUT
The following tools will be required to complete the
installation of every DC fan. Additional tools may be
DOWNTUBE & MOUNT ASSEMBLY
DOWNTUBE & MOUNT ASSEMBLY
required depending on the application and installation
location of the fan.
• Socket Wrench with 7/16 in., 1/2 in., 9/16 in., and
10 mm Sockets
• 7/16 in., 1/2 in., and 9/16 in. Wrenches
• Adjustable Wrench
• Torque Wrench (up to 50 ft∙lbf)
• Torque Wrench (up to 120 in∙lbf)
• Drill and 7/16 in. Drill Bit
• Phillips Screwdriver
• Level
6
High Volume, Low Speed Ceiling Fans
Hardware Kit (Optional)
Bag # 916410
(1)
15 Ft. Guy Wire (4)
®
UG2 Gripple
Turnbuckle (4)
GUY WIRE CLAMP BOLT
Bag # 916380
GUY WIRE CLAMP ASSEMBLY
QUICK LINK
GUY WIRE
Plate (1)
3/8 in. - 16 GRADE 5 NYLON LOCKNUT
I-Beam Clamping
Plate Shim (2)
STRUCTURAL STEEL ANGLES
(BY OTHERS)
I-BEAM CLAMPING PLATE
I-BEAM CLAMPING PLATE
I-BEAM CLAMPING PLATE SHIM
UNIVERSAL MOUNTING PLATE
1/2 in. WASHER
1/2 in. - 13 GRADE 8 NYLON LOCKNUT
STEEL TRUSS / BAR JOIST
SQUARE WASHER PLATE
1/2 in. WASHER
1/2 in. - 13 GRADE 8 NYLON LOCKNUT
1/2 in. Washer (8)
1/2 in. – 13 Grade 8, Nylon Locknut (4)
STEEL TRUSS / BAR JOIST
3/8 in. – 16 x 1 in. Grade 5, Hex Bolt (4)
3/8 in. – 16 Grade 5, Nylon Locknut (4)
TORQUE TO 35 FT LBF
(47.5 N m)
3/8 in. - 16 GRADE 5 NYLON LOCKNUT
Z-Purlin Backing
STEEL BEAM
3/8 in. – 16 x 1 in. Grade 5, Hex Bolt (16)
STEEL BEAM
SQUARE WASHER PLATE
3/8 in. – 16 Grade 5, Nylon Locknut (16)
1/2 in. WASHER
1/2 in. - 13 GRADE 8 NYLON LOCKNUT
I-BEAM MOUNTING PLATE
STEEL TRUSS / BAR JOIST
Remote LED Light Driver (1)
DOWNTUBE ASSEMBLY
1/4 in. – 20 x 1 in. Stainless Steel Machine Screw (3)
1/2 in. - 13 GRADE 8 HEX BOLT
(BY OTHERS)
• Impact Driver
• #2 Phillips Bit and Driver
• Cable Cutters
• Wire Strippers
NOTE: Model DC fan components can weigh 40 lbs or
greater depending upon the fan size and accessories
that are provided. A suitable means for lifting the weight
of the fan to the mounting point, such as a scissor lift,
should be used for all DC fan installations.
Steel Truss Hardware Kit (Optional)
Bag # 916376
Square Washer Plate (4)
Z-Purlin Hardware Kit (Optional)
Bag # 916382
STRUCTURAL STEEL ANGLES
(BY OTHERS)
Z-Purlin Mounting
Plate (2)
Bracket (2)
1/2 in. - 13 GRADE 8 HEX BOLT
(BY OTHERS)
Hub Plate With LED Light (Optional)
Bag # 916400
Lorem ipsum
I-BEAM CLAMPING PLATE
I-BEAM CLAMPING PLATE SHIM
3/8 in. - 16 x 3 in. GRADE 5 HEX BOLT
Z-PURLIN BRACKET BACKING PLATE
Hub Plate/LED Light Assembly (1)
3/8 in. - 16 x 2 in. GRADE 5 HEX BOLT
3/8 in. - 16 GRADE 5 NYLON LOCKNUT
TORQUE TO 35 FT LBF
(47.45 N m)
3/8 in. -
Z-PURLIN
(BY OTHERS)
®
Z-
Advertisement
Table of Contents
