Table of Contents
Advertisement
Optional Fan Components
Gripple
®
Hardware Kit (Optional) Bag # 915067
®
No. 4 Gripple
GUY WIRE
No. 4 GRIPPLE
®
CONNECTOR
Quick Link (8)
I-Beam Hardware Kit (Optional) Bag # 915428
GUY WIRE CLAMP BOLT
I-Beam Clamping
Plate (2)
GUY WIRE CLAMP ASSEMBLY
QUICK LINK
1/2 in. Washer (8)
GUY WIRE CLAMP BOLT
1/2 in. – 13 Grade 8, Nylon Locknut (4)
GUY WIRE
GUY WIRE CLAMP ASSEMBLY
1/2 in. – 13 x 21/2 in. Grade 8, Hex Bolt (4)
GUY WIRE CLAMP BOLT
Steel Truss Hardware Kit (Optional) Bag # 915429
QUICK LINK
GUY WIRE CLAMP ASSEMBLY
I-BEAM CLAMPING PLATE
GUY WIRE
I-BEAM CLAMPING PLATE SHIM
Square Washer Plate (4)
QUICK LINK
UNIVERSAL MOUNTING PLATE
1/2 in. Washer (16)
GUY WIRE
1/2 in. WASHER
1/2 in. – 13 Grade 8, Nylon Locknut (8)
1/2 in. - 13 GRADE 8 NYLON LOCKNUT
1/2 in. – 13 x 11/2 in. Grade 8, Hex Bolt (4)
DOWNTUBE & MOUNT ASSEMBLY
DOWNTUBE & MOUNT ASSEMBLY
Required Tools
STRUCTURAL STEEL ANGLES
(BY OTHERS)
The following tools will be required to complete the
installation of every DS-M fan. Additional tools may be
required depending on the application and installation
location of the fan.
• Socket Wrench with 7/16 in., 1/2 in., 9/16 in.,
3/4 in. and 17mm Sockets
• 7/16 in., 1/2 in., 9/16 in. and 3/4 in. Wrenches
1/2 in. - 13 GRADE 8 HEX BOLT
• Adjustable Wrench
(BY OTHERS)
• Torque Wrench (up to 50 ft∙lbf)
SQUARE WASHER PLATE
• Torque Wrench (up to 120 in∙lbf)
1/2 in. WASHER
1/2 in. - 13 GRADE 8 NYLON LOCKNUT
• Drill and 9/16 in. Drill Bit
• Phillips Screwdriver
• Level
• Impact Driver
• #2 Phillips Bit and Driver
• 3/8 in. Magnetic Nut Driver
STEEL TRUSS / BAR JOIST
6
High Volume, Low Speed Ceiling Fans
1/2 in. - 13 GRADE 8 HEX BOLT
(5)
20 Ft. Guy Wire (4)
Turnbuckle (4)
GUY WIRE CLAMP BOLT
GUY WIRE CLAMP ASSEMBLY
QUICK LINK
GUY WIRE
I-Beam Clamping
Plate Shim (2)
I-BEAM CLAMPING PLATE
I-BEAM CLAMPING PLATE SHIM
UNIVERSAL MOUNTING PLATE
1/2 in. WASHER
1/2 in. - 13 GRADE 8 NYLON LOCKNUT
Wood Beam Hardware Kit (Optional) Bag # 915429
Wood Beam Bracket (2)
1/2 in. – 13 x 11/2 in. Grade 8, Hex Bolt (4)
1/2 in. – 13 Grade 8, Nylon Locknut (8)
1/2 in. Washer (16)
Z-Purlin Hardware Kit (Optional) Bag # 915431
Z-Purlin Backing
Plate (2)
1/2 in. - 13 x 1-3/4
GRADE 8 HEX BOLT
1/2 in. – 13 x 13/4 in. Grade 8, Hex Bolt (20)
1/2 in. – 13 Grade 8, Nylon Locknut (20)
1/2 in. Washer (40)
Z-PURLIN
BACKING PLATE
Z-PURLIN MOUNTING
• Magnetic Nut Driver Extension
NOTE: Model DS-M fan components can weigh 90 lbs.
or greater depending upon the fan size and accessories
that are provided. A suitable means for lifting the weight
of the fan to the mounting point, such as a scissor lift,
should be used for all DS-M fan installations.
1/2 in. - 13 GRADE 8
NYLON LOCKNUT
1/2 in. WASHER
WOOD BEAM
Z-Purlin Mounting
Bracket (2)
Z-PURLIN
1/2 in. - 13 x 1-3/4
GRADE 8 HEX BOLT
Z-PURLIN
BACKING PLATE
BRACKET
1/2 in. - 13 GRADE 8
NYLON LOCKNUT
WOOD BEAM
BRACKET
1/2 in. - 13 GRADE
Z-
(B
1/2 in. WASHER
Z-PURLIN MOU
BR
®
Advertisement
Table of Contents
