Hawking HNC800PTZ Quick Installation Manual page 17

•
The HNC800PTZ has a default IP Address of: 192.168.0.99.
Administrator's default user name is "root" and it cannot be changed. The
Administrator's default password is blank.
•
The IP Setup wizard has many additional functions that have not been
described in this QIG. For detailed explanations of these functions, it is
highly recommended that you review the IP Setup wizard's manual,
located on the CD that was included with the HNC800PTZ's packaging.
To access the manual, click on "IP Setup & Utility" when the main page
of the CD loads. Then, in the "IP Setup and Management & Control
Software" page that follows, click on "IP Setup Manual".
•
You can access and view your network camera's images via a web browser
using two methods:
•
You can also use the included software a
playback the network camera's images.
•
The example illustrated in the previous section "Step 4: R
Program" de
within your LAN. For an example of how to view your network camera
outside of your existing LAN via the In
the user's manual titled "How to View
•
If the image is blurry, this is most likely because the camera is out of focus.
To focus the camera, click on either the p
button on the camera's homepage.
•
It is highly recommended that you install the network cameras
before placing them in the desired physical location.
1.
In your web browser's address bar, type in
"http://IPAddressofCamera".
2.
In the IP Setup window, click on Link to selected
device.
als with setting up an IP address to view the net
pplication to view, record, and
ternet, please refer to
Your Camera via
lus or minus sign
The
un the IP Setup
work camera
the section in
the Internet".
on the "Focus"
17