Hawking HNC800PTZ Quick Installation Manual page 16

Note
It is highly recommended that you now go to the network camera's webpage and
ensure that the device has been configured with the appropriate network settings.
Once the IP Setup program returns a valid IP address, please go to the network
c amera's homepage by either clicking on "Link to Selected Device" in the IP
S etup window, or typing the camera's IP address in your web browser's
" Address" bar. In the camera's homepage, click on "Configuration". Then, click
o n "Network" in the column menu on the left side of the page. Please ensure that
y our camera's network settings are consistent with your existing LAN settings. If
th ey are not, you can set them in the fields provided (see figure below). Once you
a re sure that the camera's network settings are correct, click on "Use fixed IP
a ddress". The camera's IP address will then always remain the same, and you can
sk ip having to perform the installation procedure each time the camera reboots.
P lease be sure to click Save at the bottom of the page to confirm the new settings.
16