Table of Contents
Advertisement
3. CONFIGURATION AND HISTORY PRINTOUT
3.1. Introduction
CAUTION!
The infusion pump has to be disconnected from the patient before and while the serial
interface cable is connected to the pump.
The connection of the ARGUS 707 over the serial interface RS 232 can be done by con-
necting the interface cable no.10.093 to the serial interface outlet of the serial COM port of
a PC.
A data transfer between ARGUS 707 and a PC can be done without any additional soft-
ware running on the PC.
3.2. Settings of the terminal program
3.2.1. RS232 connection settings of the terminal program
Make the appropriate changes on the "COM Proper-
ties" menu according to the right hand picture:
Click OK, then a connection to the pump should now
be established.
14.164.A_A707en.SM.V1.01.doc
CONFIGURATION AND HISTORY PRINTOUT
Open the terminal program on the PC, e.g.
HyperTerminal, which has been included in every
Microsoft
Windows
In the "Connection Description" menu, type for e.g.
"ARGUS" and click OK.
Please make sure that the correct COM port of the PC
has been selected.
ARGUS Medical AG 10.02.04 AS
Operating System.
11 / 38
Advertisement
Table of Contents
