Operation And Use; Charging Your Mobile Phone Wirelessly - Tronic TKHQ 10 A1 Operating Instructions Manual

Operation and use

Charging your mobile phone wirelessly

NOTE
The car cradle is not suitable for using the mobile phone in a horizontal
►
direction .
Some mobile phones need to be taken out of their case for charging .
►
At ambient temperatures above 25°C, the charging power is reduced
►
to protect against overheating . This increases the charging time of
your mobile phone .
When a non-compatible mobile phone is placed in the car cradle, the
►
LED 3 flashes . Use a suitable adapter for induction charging .
Place the mobile phone on the supports 5 of the car cradle . The weight
♦
of the mobile phone causes the holding clamps 6 to move inwards
automatically .
Charging starts immediately and is indicated on the display of the
♦
mobile phone . The LED 3 lights up permanently, also signalling that
the mobile phone is being charged .
Adjust the tilt of the car cradle so that the viewing angle of your mobile
♦
phone meets your needs . Undo the screw ring r a little to make it
easier to adjust the ball joint t .
Lift the mobile phone to remove it from the car cradle . The holding
♦
clamps 6 automatically move outwards .
│ GB │ IE │ NI
■ 14 TKHQ 10 A1