Tronic TKHQ 10 A1 Operating Instructions Manual page 11

Do not expose the device to water spray or dripping water, and do not
■
place liquid-filled objects such as vases or open drink containers on or
near the device .
Keep the device away from open flames (e .g . candles) at all times .
■
The device is not designed for use in rooms with high temperatures or
■
humidity (e .g . bathrooms) or where there is excessive dust .
Do not use the device immediately after moving it from a cold room to a
■
warm room . Always allow the device to acclimatise before turning it on .
Do not cover the device during operation .
■
Due to the high power consumption, a USB mains adapter must be used
■
to operate the charging pad . Do not use the charging pad on a USB
port of a PC or notebook .
Never subject the device to extreme heat or humidity . This particularly
■
applies to storage in a car . If the car is stationary for extended periods
and in hot weather with direct sunlight, high temperatures occur in the
car interior and the glove compartment . Remove any electrical and
electronic devices from the vehicle .
WARNING! When setting up the device, make sure that it does
■
not obstruct steering, braking or the operation of other vehicle operating
systems (e .g . airbags) or restrict your field of vision when driving .
DANGER! Do not place the car cradle in or near the deployment
■
area of the airbag as the cradle would be flung through the vehicle
interior when the airbag deploys, which could result in serious injuries .
Ensure that the cradle is not installed in a location where you could
■
come into contact with it in the event of an accident or collision .
If you want to charge your mobile phone by induction in the car cradle,
■
make sure that the phone case does not contain any metal plate . Metal
components could cause the device to overheat .
│ GB │ IE │ NI
■ 8 TKHQ 10 A1