Tronic TKHQ 10 A1 Operating Instructions Manual page 16

Plug the car/USB adapter 0 into the 12/24 V socket (cigarette lighter)
♦
in your vehicle .
The operating LED 8 lights up white to indicate that the car/
USB adapter 0 is ready for use .
Depending on the vehicle type, it is possible that the ignition has to be
switched on first .
CAUTION
The total power consumption of the devices connected to the two
►
USB sockets 7/9 may not be higher than 5 .4 A . Make sure that the
power consumption of your device is no higher than 3 A when you
are using the USB socket 9 (green) . When you are using the USB
socket 7, make sure that the power consumption of your device is no
higher than 2 .4 A . Refer to the operating instructions of your device
for more information .
The maximum power output of the car/USB adapter 0 is 5 .4 A .
►
The maximum power output of the USB socket (green) 9 is 3 A .
The maximum power output of the USB socket 7 is 2 .4 A .
NOTE
The USB socket (green) 9 supports the Qualcomm
►
Charge TM 3 .0 standard . If the connected device is compatible with
this charging standard, it will be detected by the car/USB adapter 0
automatically . The car/USB adapter 0 supplies the appropriate
output voltage or output current so that your device can be charged
more quickly . Devices without this charging standard can also be
charged using the USB socket (green) 9 .
TKHQ 10 A1
®
Quick
GB │ IE │ NI │
13 ■