Fastening The Car Cradle To The Air Vents; Connecting The Car Cradle - Tronic TKHQ 10 A1 Operating Instructions Manual

Fastening the car cradle to the air vents

Press and hold the spreader button z so that the air vent clamps u
♦
open .
Clamp the car cradle to an air vent and release the spreader button z .
♦
To remove the car cradle from the air vent, press the spreader button z
♦
and carefully pull the cradle out of the air vents .

Connecting the car cradle

Connect the car cradle to the car/USB adapter 0 via the charging
♦
cable q, see fig . 1 .
│ GB │ IE │ NI
■ 12
Fig . 1 Fig . 1
TKHQ 10 A1