Using The Device; Unpacking; Check Package Contents; Fitting The Car Cradle - Tronic TKHQ 10 A1 Operating Instructions Manual

Using the device

Unpacking

Remove all parts and the operating instructions from the packaging .
♦
Remove all packaging material .
♦

Check package contents

The following components are included in delivery:
Car holder with clamping device for air vents 2 (two parts)
▯
Car/USB adapter 0
▯
Charging cable q
▯
These operating instructions w
▯
NOTE
Check the package for completeness and signs of visible damage .
►
If the delivery is incomplete or damage has occurred as a result of
►
defective packaging or during transport, contact the service hotline
(see section Service) .

Fitting the car cradle

Unscrew the screw ring r from the car cradle .
♦
Place the screw ring r over the ball joint t and press the ball joint t
♦
into the ball joint socket e (see fig . B) .
Screw the screw ring r clockwise firmly onto the ball joint socket e .
♦
TKHQ 10 A1
GB │ IE │ NI │
11 ■