Installing A Mini-Flash Module C-Vi; Removing A Mini-Flash Module C-Vi - Cisco CISCO1750 Installation Manual

Installing a Mini-Flash Module
Installing a Mini-Flash Module
You can install a mini-Flash module (shown in Figure 3) to increase the amount
of Flash memory in the router.
Figure 3
Notched edge
Removing a Mini-Flash Module
Follow these steps to remove a mini-Flash memory module:
Note You need to remove the motherboard from the chassis to remove the
mini-Flash memory module.
Warning During this procedure, wear grounding wrist straps to avoid ESD
damage to the router. Do not directly touch the backplane with
your hand or any metal tool, or you could shock yourself.
Cisco 1750 Router Hardware Installation Guide
vi
Mini-Flash Module
78-6169-02