Front-Panel Leds - Cisco CISCO1750 Installation Manual

Front-Panel LEDs

Table 3
LED Label
SLOT 2 OK
PVDM OK
Front-Panel LEDs
Use the router front-panel LEDs to determine network activity and status on the
Ethernet port and on the WIC and VIC ports. The front-panel LEDs are illustrated
in Figure 3 and described in Table 4.
Figure 3
Table 4 Front-Panel LEDs
LED Color
PWR Green
OK Green
ETH
Cisco 1750 Router Hardware Installation Guide
vi
Rear Panel LEDs (continued)
Color Description
Green On when a VIC is correctly inserted in the card slot.
Green On when a packet voice data module (PVDM) is
correctly inserted in the card slot.
Front-Panel LEDs
SLOT0
PORT0
PWR
PORT1
OK
Cards
Supported LED Meaning
– On when DC power is being supplied to the router.
– On when the router has successfully booted up and the
software is functional. This LED blinks during the
power-on self-test (POST).
Refer to the "OK LED Diagnostics" section in the
"Troubleshooting" chapter for information on how to use
this LED for router diagnostics.
SLOT2
SLOT1
PORT0
PORT0
PORT1
PORT1
ETH
ACT
COL
78-6169-02