Online User; Block And Allow Lists; Security Management - Genie WIPX2LBVLPR User Manual

Network Camera User Manual

4.7.2 Online User

Go to ConfigSecurityOnline User to view the user who is viewing the live video.
An administrator user can kick out all the other users (including other administrators).

4.7.3 Block and Allow Lists

Go to ConfigSecurityBlock and Allow Lists as shown below.
The setup steps are as follows:
Check the "Enable address filtering" check box.
Select "Block/Allow the following address", IPv4/IPv6/MAC and then enter IP address or
MAC address in the address box and click the "Add" button.

4.7.4 Security Management

Go to ConfigSecuritySecurity Management as shown below.
In order to prevent against malicious password unlocking, "locking once illegal login"
function can be enabled here. If this function is enabled, login failure after trying six times
will make the login interface locked. The camera can be logged in again after a half hour or
after the camera reboots.
For some specified versions, anonymous login with a private protocol can be enabled here. If
this function is enabled, enter http://host:port/Anonymous/1[2/3] (eg.
http://192.168.226.201:80/Anonymous/1) via web browser to access the camera. 1 indicates
main stream; 2 indicates sub stream; 3 indicates third stream. Only video can be viewed by
this means and no other operations can be done. If no such function, please skip the
instruction.
45