Image Configuration; Display Configuration - Genie WIPX2LBVLPR User Manual

2mp h.265 ip lpr camera with 7-22mm motorised lens with 50m ir

Hide thumbs Also See for WIPX2LBVLPR:

Table of Contents

Network Camera User Manual

4.2 Image Configuration

Image Configuration includes Display, Video/Audio, OSD, Video Mask and ROI Config.

Go to ImageDisplay interface as shown below. The image's brightness, contrast, hue and

saturation and so on for common, day and night mode can be set up separately. The image

effect can be quickly seen by switching the configuration file.

Brightness: Set the brightness level of the camera's image.

Contrast: Set the color difference between the brightest and darkest parts.

Hue: Set the total color degree of the image.

Saturation: Set the degree of color purity. The purer the color, the brighter the image is.

Sharpness: Set the resolution level of the image plane and the sharpness level of the image

edge.

Noise Reduction: Decrease the noise and make the image more thorough. Increasing the

value will make the noise reduction effect better but it will reduce the image resolution.

Defog: Activating this function and setting an appropriate value as needed in foggy, dusty,

smoggy or rainy environment to get clear images.

Table of Contents