Video Mask - Genie WIPX2LBVLPR User Manual

2mp h.265 ip lpr camera with 7-22mm motorised lens with 50m ir

Hide thumbs Also See for WIPX2LBVLPR:

Table of Contents

Network Camera User Manual

the "Save" button to save the settings.

Picture Overlap Settings:

Check "OSD Content1", choose "Picture Overlay" and click "Browse" to select the overlap

picture. Then click "Upload" to upload the overlap picture. The pixel of the image shall not

exceed 200*200, or it cannot be uploaded.

4.2.4 Video Mask

Go to ImageVideo Mask interface as shown below. A maximum of 4 zones can be set up.

To set up video mask:

1. Enable video mask.

2. Click the "Draw Area" button and then drag the mouse to draw the video mask area.

3. Click the "Save" button to save the settings.

4. Return to the live to verify that the area have been drawn as shown as blocked out in the

image.

Table of Contents