Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Genie W96EBV
Summary of Contents for Genie W96EBV
- Page 1 W96EBV | W96EBVW Vandal Resistant Dome Camera with IR LED’s User Manual...
-
Page 2: Safety Precautions
Safety Precautions DO NOT ATTEMPT TO DISASSEMBLE THE CAMERA. Risk of Electric Shock, Do Not Open CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSON This symbol is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. - Page 3 Warning 1. This product is patented for configuration, appearance and design; copying is not permitted. 2. If this product fails to operate normally contact your authorised distributor or service centre. Never disassemble or modify the product in any way. Problems caused by disassembly, modification or repair invalidates the product warranty.
-
Page 4: Important Safety Instructions
Important Safety Instructions 1. Read these instructions 2. Keep these instructions for later use. 3. Pay attention to all warnings and adhere to them. 4. Follow all instructions. 5. Do not immerse this product in water. 6. Clean only with a lint free dry cloth. 7. -
Page 5: Cover Removal
1. Features • The W96EBV Series cameras are equipped with a 1/3” SONY 960H CCD and an advanced Digital Signal Processor (DSP). It has a horizontal resolution of 700TVL, which provides clear and vivid images. • 2.8-12mm Varifocal Auto Iris Lens. -
Page 6: Power Supply
Power Supply (1) Only use a regulated CE approved DC12V power supply, such as the Genie PSU1SM. (2) To prevent fire or electrical shocks UL listed Class 2 wiring should be used on the DC12V input terminals. (3) Make sure that the power wiring is connected to the correct terminals. Incorrect connection can cause permanent damage to the camera. - Page 7 • Connecting Low Voltage Power & Video Signal The wiring harness has a BNC connector to output the video signal and the other connector is used to input DC12V low voltage power – polarity conscious. An adapter is provided to connect directly to bare cable ends. DC12V VIDEO • Adjusting the Camera Direction...
-
Page 8: Specification
Specification Model Number W96EBV W96EBVW Image Device 1/3” Sony Effio-E 960H CCD TV System Total Pixels 1020 (H) x 596 (V) Effective Pixels 976 (H) x 582 (V) Scanning System 2:1 Interlaced Synchronisation Internal Horizontal Resolution 700TV Lines Minimum Illumination... - Page 9 Memo Vandal Resistant Dome Camera with IR LED’s...
- Page 10 GENIE CCTV LTD. CCTV House, City Park, Watchmead, Welwyn Garden City, Hertfordshire, AL7 ILT Tel: +44 (0) 1707 330541 Fax: +44 (0) 1707 330543 www.geniecctv.com Edition. GN-January 2014...