ECS P6EXP-Me Manual page 32

IDE HDD Block Mode
Block mode transfers can improve the access to IDE devices. Enable this item if your IDE
devices support block mode transfers.
IDE Primary Master PIO
IDE Primary Slave PIO
IDE Secondary Master PIO
IDE Secondary Slave PIO
Each IDE channel supports a master device and a slave device. These four items let you
assign which kind of PIO (Programmed Input/Output) is used by IDE devices. You can
choose Auto, to let the system auto detect which PIO mode is best, or you can install a PIO
mode from 0-4.
IDE Primary Master UDMA
IDE Primary Slave UDMA
IDE Secondary Master UDMA
IDE Secondary Slave UDMA
Each IDE channel supports a master device and a slave device. This motherboard supports
UltraDMA. UltraDMA technology provides faster access to IDE devices. If you install a
device which supports UltraDMA, change the appropriate item on this list to Auto. You
may have to install the UltraDMA driver supplied with this motherboard in order to use an
UltraDMA device.
On-Chip Primary PCI IDE
On-Chip Secondary PCI IDE
These items allow you to enable or disable the primary and secondary IDE channels built
into this mainboard.
USB Keyboard Support
Enable this item if you are using a keyboard connected through the USB interface.
Default: Enabled
Default: Auto
Default: Auto
Default: Auto
Default: Auto
Default: Auto
Default: Auto
Default: Auto
Default: Auto
Default: Enabled
Default: Enabled
Default: Disabled
29