ECS P6EXP-Me Manual page 19

Part Two – External Connections
After you have installed the mainboard and completed the internal connections, you
can use the external connectors to attach peripheral devices to your system.
PS2KBM1
1. PS2KBM1 is a stack of two PS/2 mini-DIN ports. The upper port can be used by a
PS/2 mouse or pointing device. The lower port can be used by a PS/2 keyboard.
2. LPT1 is a parallel port that can be used by printers or other parallel
communications devices. The system identifies the parallel port as LPT1.
3. The upper 15-pin port J3 is a game/MIDI port. You can use this port to connect a
joystick or a MIDI device to your system
4. The lower part of J3 is three audio jacks. The left side jack is for a stereo line out
signal. The middle jack is for a stereo line in signal. The right side jack is for a
microphone.
5. COM2 is a serial port that can be used by serial devices such as a mouse, a
fax/modem and so on. This serial port is identified by the system as COM2/4.
6. COM1 is a serial port that can be used by serial devices such as a mouse, a
fax/modem and so on. This serial port is identified by the system as COM1/3.
7. USB1 is a stack of two Universal Serial Bus ports. Use these ports to connect to
USB devices.
16
LPT1
USB1
COM1
J3
COM2
J3