Run Screens - Graco HFR Setup And Operation

Run Screens

Run Screens
Run screens are divided into five major sections: status,
errors, events, and maintenance. The following diagram
demonstrates the flow of the Run screens beginning
with the Home screen.
Home Status
F . 16: Run Screens Navigation Diagram
IG
Home Screen
The Home screen is the first screen that displays in the
Run screens. It shows the current fluid pressure on the
A (Red) and B (Blue) fluid outlets of the pump and if
there are any active errors. If tanks are installed in the
system, the fill level is shown on each tank.
To select an operating mode, press the Select Mode
button repeatedly until the desired mode is shown
then press the Enter button
Alternately, press the Select Mode button and use the
up and down arrow keys until the desired mode is
shown, then press the Enter button
mode. The available operating modes are operator,
sequence, shot, standby, night, and disabled.
Icon
Select mode.
50
Errors #1 Events #1
Errors #2 Events #2
Errors #... Events #...
to select the mode.
to select the
Function
Maintenance
313997A