System Events - Graco HFR Setup And Operation

Troubleshooting

System Events

Event Code and
String Triggers
REL00: System Pow- The System was powered on.
ered On
REM00: System Pow- The System was powered off.
ered Off
REB00: Stop Button The Red stop button was pressed on
Pressed the Advanced Display Module.
RECH0: Learn Mode A learn mode calibration was success-
Executed fully completed.
RENN0: Automatic The system was successfully charac-
Cal. Performed terized with the Automatic calibration.
RECA1: Red Mate- The Red materials specific gravity was
rial SG Modified modified.
RECB2: Blue Material The Blue materials specific gravity was
SG Modified modified.
RENC1: Cal. Point 1 A value for the first point in the three
Weight Entered point calibration was entered.
RENC2: Cal. Point 2 A value for the second point in the
Weight Entered three point calibration was entered.
RENC3: Cal. Point 3 A value for the third point in the three
Weight Entered point calibration was entered.
RENC4: Cal. Point 1 The running average for point one of
Weight Erased the three point calibration was erased.
RENC5: Cal. Point 2 The running average for point two of
Weight Erased the three point calibration was erased.
RENC6: Cal. Point 3 The running average for point three of
Weight Erased the three point calibration was erased.
REND0: Ratio Check A ratio check shot was dispensed from
Dispense the ratio check calibration screen.
REA00: Disp. A dispense has occurred of the given
Occurred (Shot #) shot number.
REH00: Gel Timer The gel timer expired and the system
Dispense automatically took the gel shot.
RER01: Shot Count A counter from the shot counters main-
Reset tenance page was erased
RER02: Seq. Posi- A counter from the sequence counters
tion Count Reset maintenance page was erased
RERA1: Red Mate- The resettable totalizer for the Red
rial Volume Reset material volume was reset to zero.
RERB1: Blue Material The resettable totalizer for the Blue
Volume Reset material volume was reset to zero.
RERA2: Red Mate- The resettable totalizer for the Red
rial Weight Reset material weight was reset to zero.
RERB2: Blue Material The resettable totalizer for the Blue
Weight Reset material weight was reset to zero.
RERA3: Red Cycle The resettable cycle counter for the
Count Reset Red pump was reset to zero.
RERB3: Blue Cycle The resettable cycle counter for the
Count Reset Blue pump was reset to zero.
REQU1: Settings The system settings were successfully
Downloaded transferred from the ADM to a USB
drive.
88
Event Code and
String Triggers
REQU2: Settings The system settings file was success-
Uploaded fully transferred from the USB drive to
the ADM.
REQU3: Language The custom language file was suc-
Downloaded cessfully transferred from the ADM to a
USB drive.
REQU4: Language The custom language file was suc-
Uploaded cessfully transferred from the USB
drive to the ADM.
REQU5: Logs Down- The Error/Event and Shot data logs
loaded were successfully transferred from the
ADM to a USB drive.
REAR0: Night Mode While in night mode the system has
Recirc On automatically entered a low recircula-
tion mode and attempted to turn on all
enabled conditioning zones.
REBR0: Night Mode While in night mode the system has
Recirc Off automatically stopped the low recircu-
lation mode and turned off all condi-
tioning zones.
313997A