Editing Or Deleting Anumber In Memory - Radio Shack TAD-726 Owner's Manual

43-726.fm Page 19 Tuesday, June 15, 1999 8:36 AM
7. Enter the phone number and any
tone or pause entries (see "Using
Tone Services on a Pulse Line" on
Page 17 and "Entering a Pause" on
Page 20).
8. Press . The phone beeps
SELECT
and Memory n Stored
After 2 seconds,
appears. Repeat Steps 3–8 to store
more numbers.
9. When you finish, press
.
Memory Store
For each stored number, write the per-
son's or company's name next to the ap-
propriate location
supplied memory directory sticker. (Use
a pencil in case you need to change the
number later.) Peel the backing from the
sticker and attach it to the phone.
To replace a stored number, store a new
one in its place.
appears.
Memory Store
to exit
MEM
number on the
EDITING OR DELETING A
NUMBER IN MEMORY
Follow these steps to edit or delete a
memory number.
1. Lift the handset.
2. Hold down
MEM
and a list of memory loca-
Store
tion numbers appear on the display.
3. Choose a memory location (
by pressing a number or by repeat-
edly pressing or
4. Press . A menu appears
SELECT
with the three options listed below.
Press or
desired option then press
choose it.
Edit Memory nn
as described in Steps 5 through 8 of
"Storing a Name and Number in
Memory" on Page 18.
Delete Memory nn
prompts you to confirm the deletion.
Move the cursor to
press or
SELECT
phone beeps, and
appears.
Deleted
. Returns you to the list of
Go Back
memory numbers.
until Memory
– )
01 20
.
to highlight the
to
SELECT
. Edit the record
. The display
or , then
Yes No
. The
DELETE
Memory n
19