Debonair Spring Installation - SRAM RockShox DebonAir Upgrade Manual

D e b o n A i r S p r i n g I n s t a l l a t i o n
1
Apply a liberal amount of grease evenly around the end of a clean Apply a liberal amount of grease evenly around the end of a clean
plastic dowel, approximately 150 mm from one end. Use the dowel to plastic dowel, approximately 150 mm from one end. Use the dowel to
apply the grease to the inside surface of the upper tube, approximately apply the grease to the inside surface of the upper tube, approximately
150 mm into the tube. 150 mm into the tube.
Dowel 150 mm
2 Apply a liberal amount of grease to the air spring shaft. Apply a liberal amount of grease to the air spring shaft.
3 Apply grease to the air piston and seal head outer o-rings/seals. Apply grease to the air piston and seal head outer o-rings/seals.
32

DebonAir Spring Installation