Table of Contents
Advertisement
8
Refer to your pre-service recorded settings, or use the air chart on the
Refer to your pre-service recorded settings, or use the air chart on the
fork's lower leg, and pressurize the air spring.
fork's lower leg, and pressurize the air spring.
You may see a drop in the indicated air pressure on the pump gauge
You may see a drop in the indicated air pressure on the pump gauge
while filling the air spring; this is normal. Continue to fill the air spring to
while filling the air spring; this is normal. Continue to fill the air spring to
the recommended air pressure.
the recommended air pressure.
Cycling the fork will equalize the positive and negative air chambers.
Cycling the fork will equalize the positive and negative air chambers.
After the fork is cycled 3-4 times, check the pressure and add air as
After the fork is cycled 3-4 times, check the pressure and add air as
needed.
needed.
Install the air valve cap.
Install the air valve cap.
9
Clean the entire fork.
Clean the entire fork.
This concludes the DebonAir Spring Upgrade Kit installation.
21
Lower Leg Assembly
Advertisement
Table of Contents
