Table of Contents
Advertisement
10
Position the front wheel in the lower leg dropouts so the hub is seated
Position the front wheel in the lower leg dropouts so the hub is seated
in the dropouts and hold it in place.
in the dropouts and hold it in place.
Verify no parts interfere with the lower leg. Consult your brake
manufacturer's instructions for brake caliper adjustment procedures.
11
Install the threaded end of the Maxle DH through the damper side of
Install the threaded end of the Maxle DH through the damper side of
the lower leg, and through the hub until it engages the threads in the
the lower leg, and through the hub until it engages the threads in the
spring side lower leg dropout.
spring side lower leg dropout.
Tighten the Maxle DH to the specified torque.
Tighten the Maxle DH to the specified torque.
12
Tighten the Maxle DH bolt on the spring side to the specified torque.
Tighten the Maxle DH bolt on the spring side to the specified torque.
13
Clean the entire fork.
Clean the entire fork.
NOTI CE
6 mm
12.5-14.7 Nm (110-130 in-lb)
6 mm
12.5-14.7 Nm (110-130 in-lb)
40
Fork Installation
Advertisement
Table of Contents
