Table of Contents
Advertisement
6
Insert a brake pad spreader into the brake caliper.
Insert a brake pad spreader into the brake caliper.
Remove the brake caliper. Temporarily secure the brake caliper and
Remove the brake caliper. Temporarily secure the brake caliper and
brake hose to the bicycle, away from the fork.
brake hose to the bicycle, away from the fork.
7
Loosen the upper and lower crown upper tube pinch bolts.
Loosen the upper and lower crown upper tube pinch bolts.
Do not loosen the upper crown steerer tube pinch bolt.
Do not loosen the upper crown steerer tube pinch bolt.
8
Slide the upper tubes down so they clear the upper crown. Leave
Slide the upper tubes down so they clear the upper crown. Leave
enough clearance between the upper tube and upper crown to remove
enough clearance between the upper tube and upper crown to remove
the frame bumpers, if installed.
the frame bumpers, if installed.
Some bicycle frames include integrated frame bumpers. Remove the
Some bicycle frames include integrated frame bumpers. Remove the
RockShox bumpers as needed.
RockShox bumpers as needed.
Tighten one of the lower crown bolts to temporarily hold the upper
Tighten one of the lower crown bolts to temporarily hold the upper
tubes in place while you remove the frame bumpers.
tubes in place while you remove the frame bumpers.
Brake Pad Spreader
4 mm
Upper Crown
4 mm
Lower Crown
4 mm
Lower Crown
25
Fork Removal
Advertisement
Table of Contents
