It is optional to change maximum fork travel by installing an All-Travel spacer onto, or removing from, the air spring shaft assembly or by replacing the
air spring assembly. It may also be necessary to add or remove Bottomless Tokens™. Refer to
details.
Refer to the RockShox® Spare Parts Catalog available at
contact your local SRAM® distributor or dealer.
Apply a liberal amount of grease to the inside of the upper tube, from
1
the end of the tube to approximately 60 mm into the tube.
Install the top out bumper onto the shaft.
2
Apply a liberal amount of grease to the air spring shaft.
3
A i r S p r i n g I n s t a l l a t i o n
www.sram.com/service
Air Spring Tra vel Change and Bottomless Tokens
for the required spare part kits. For part ordering information, please