Sony SX-M700 Service Manual page 37

SX-E120
Procedure
1. Remove the top panel. (Refer to section, "2-1.
REMOVAL OF THE EXTERNAL PANELS".)
2. Open the harness clamp securing the harness to the PS-
364 board.
3. Disconnect the six connectors (CN903 to CN908) from
the PS-364 board.
4. Remove the six screws (PSW 3x8), then remove the
PS-364 board.
Connector
CN903
SX-M700
Connector CN905
(from AL-31 board)
Connector CN904
(from AL-31 board)
Screws (3 pcs)
PSW 3x8
Connector CN908
Screws (3 pcs)
(from CPU-181 board)
PSW 3x8
Connector CN906
(from power lamp)
Connector CN907
(from AL-31 board)
PS-364 board
Harness clamp
2-7(E)