Sony SX-M700 Service Manual page 18

Specifications
Design and specifications are subject to change
without notice.
SX-M700 Control Unit
Input/output DELEGATE'S /CHAIRMAN'S
UNIT (20-pin multi-connector) ×4
INTERPRETER'S UNIT (20-pin
multi-connector) ×2
TELEPHONE COUPLER (6-pin
multi connector ) ×1
Input EXT IN-1/EXT IN-2
MIC (XLR 3-pin connector) ×1
Balanced type, input level 0.77
a)
mV (–60dBs ), for microphone
having low impedance
a) 0 dBs = 0.775 V
MIC (phone jack) ×1
Unbalanced type, input level 0.77
mV (–60dBs), for microphone
having low impedance
LINE (phono jack) ×2
Balanced type, input level 250 mV
(–10dBs), input impedance 10
kilohms
EXT UNIT IN (phono jack) ×1
Input level 1.23 V (+4 dB), input
impedance 10 kilohms
AC IN (3-pin) ×1
for AC power input
Output LINE OUT ORG/CH1 to CH6 (phono
jack) ×7 for each line
Output level 250 mV (–10dBs),
load impedance 10 kilohms
PHONES (stereo phone jack) ×1
EXT UNIT OUT (phono jack) ×1
Output level 1.23 V (+4 dB), load
impedance 10 kilohms
Power requirements
USA model:120 V, 60Hz
European model: 230 V, 50/60Hz
Power consumption
USA model: 1.2A
European model: 100W
424 × 98 × 388.6 mm (w/h/d)
Dimensions
× 3 × 15
3 7 3
(16 ⁄ ⁄ ⁄ inches)
4 8 8
Mass 6.2 kg (13 lb 10 oz)
Accessories supplied
AC power cord (1)
Operating instructions (1)
SX-C700A/C750 Chairman's Unit
SX-D700A/D750 Delegate's Unit
Voting connector (6-pin) ×1
Input/Output
Input Input connector (for SX-C750/D750
only) (D-sub 15-pin) ×1
Sony Corporation
Printed in Japan
28
Earphone output (minijack) ×2
Output
REC OUT (minijack)×1
Output level 250 mV (–10dBs),
load impedance 47 kilohms
Microphone line
Output level 250 mV (–10dBs)
Power requirements
24 V DC
Power consumption
45 mA
Dimensions SX-C700A/D700A :
134 × 401 × 152 mm (w/h/d)
× 15 × 6 inches)
3 7
(6 ⁄ ⁄
4 8
SX-C750/D750
245 × 372.5 × 100 mm
b)
× 14 × 4 inches)
3 3
(w/h/d) (9 ⁄ ⁄
4 4
b) This does not include the part
under the desk.
The part under the desk is 40 mm.
Mass SX-C700A/D700A: 0.7 kg (1 lb 9 oz)
SX-C750/D750: 0.65 kg (1 lb 7 oz)
SX-P700 Interpreter's Unit
Input/output CONTROL UNIT/INTERPRETER'S
UNIT (20-pin multi connector) ×2
MIC IN (XLR 3-pin) ×2
Input
Balanced and unbalanced type,
input level 0.77/0.24 mV
(–60dBs/–70dBs) selectable
LINE OUT (phono jack) ×1
Output
Output level 250 mV (–10dBs),
output for speaker
MAIN/SUB (stereo phone jack) ×4
–26 dBs/8 ohms with the
maximum output level,
–16dBs with the maximum volume
setting
Power requirements
24 V DC
Power consumption
40 mA
Dimensions 346.5 x 78.3 x 207.5 mm (w/h/d)
× 3 × 8
3 1 1
(13 ⁄ ⁄ ⁄ inches)
4 8 4
Mass 1.5 kg (3 lb 4 oz)
SX-T100 Telephone Coupler
Input/output CONTROL UNIT (6-pin multi
connector)×1
250 mV (–10 dBs)
Power requirements
24 V DC
Power consumption
18 mA
90 × 74.5 × 213 mm (w/h/d)
Dimensions
× 3 × 8
5 1
(3 ⁄ ⁄ inches)
8 2
Mass 0.6 kg (1 lb 5 oz)
Accessory supplied
Connecting cord (1)