Program Playback - Teac CD-P1440 Owner's Manual

Program Playback

... This function allows you to program up to 32 tracks for playback in any desired order.
... Programming tracks is possible only when the player is in the stop mode.
Programing Tracks
1. Press the PROGRAM button in the stop mode.
MEMORY, TRACK, STEP indicators become bright, and
track No. and step No. blink in the display.
2. Press the desired track No. with the 10-Key buttons on
the unit or the remote control.
Example: The disc with 30 tracks to play in the order 7, 25.
1. Press "7" with the 10-Key buttons on the unit or the
remote control.
In the MUSIC CALENDER, track No. "7" and next step "2"
blink in the display.
2. Press "+10" twice and then "5" with the 10-Key buttons
on the unit or the remote control.
When "+10" is pressed twice, "2-" will light in the TRACK
indicator, and "2" will blink in the STEP indicator.
When "5" is pressed, OVER indicator lights up, and track
No. "25" and next step "3" blink in the display.
3. Press the PLAY button ( Á
The first programmed track "7" will be played.
The player automatically stops when all of the programmed
tracks "7, 25" have finished playing.
Press the PLAY button ( Á
playback.
10
Á ).
Á ) again to restart the program
To Modify the Program
1. Press the STOP button ( ª ) .
2. Press the CHECK button on the remote control.
Every time the CHECK button is pressed, the programmed
steps are shown in the display one after another.
Press this button until the desired step is shown in the
display.
3. Press the desired track No. with the 10-Key buttons on
the unit or the remote control.
Press the CHECK button to check the program.
Adding a Track
1. Press the STOP button ( ª ) .
2. Press the CHECK button.
Every time the CHECK button is pressed, the programmed
steps are shown in the display one after another.
Press this button until the last step is shown in the display.
3. Press the desired track No. in the last step with the 10-
Key buttons on the unit or the remote control.
Press the CHECK button to check the program.
Deleting a Track from the Program
1. Press the STOP button ( ª ) .
2. Press the CHECK button.
Every time this button is pressed, the programmed steps are
shown in the display one after another.
Press this button until the desired step is shown in the
display.
3. Press the CLEAR button.
The track will be deleted from the program, and the first step
of the program is shown in the display.
Stopping Program Play
Press the STOP button ( ª ) .
The player enters the stop mode, and the first step of currently
played track is shown in the display.
If the PROGRAM button is pressed in the stop mode with
MEMORY indicator on, the program playback is cancelled, and
the player enters the normal play mode. In such a case, press
the PROGRAM button again in the stop mode to play program
playback.
Cancelling Program Play
To cancel the PROGRAM PLAY function, press the CLEAR
button over 2 seconds until the display changes, or press the
OPEN/CLOSE button ( ø ) .