Using Program Playback - Teac PD-H01 Owner's Manual

Using program playback (1)

1 Press the PROGRAM button.
"NoPGM" appears on the display .
o You can add tracks to a program even during playback .
2 Use the number buttons to select tracks.
The input number appears on the display .
o When programming, if you press a number button
that determines a track number, it will be set imme-
diately without pressing the ENTER button and that
number will not appear on the display . This allows
you to quickly add multiple tracks to a program .
For example, when programming track number 8
from a total of 20 tracks, the track will be added as
soon as you press the 8 button . To program track
number 1, though, after pressing "1", you will also
need to press ENTER .
24
PD-H01_OM_EFS_vA_CS6.indb 24 13/01/25 17:06