JVC LT-32DP9BU Instructions Manual page 40

Problem
Is the TV connected correctly to the aerial?

Change the direction of the indoor aerial.

Check digital channels signal with "Signal

Check". (P. 34)
"Missing or weak
If you still cannot watch the digital channels

signal"
after following the steps above, there may
be a problem with your aerial or its cable. Or,
the signal may be too weak.
Consult your retailer.
Æ
"Services have
changed. Do you Update the PR List

want to Update PR "Update Scan" (P. 32)
Æ
list?"
While watching TV, the message appears

"The timer will start
when a timer programme is about to start,
soon"
indicating that the channel will be switched.
Some digital channels cannot be watched on

No picture, no sound
this TV. (P. 40)
When the clock is
Change the "Time Zone" setting. (P. 29)

off time
ENGLISH
Actions
Getting started
Problem
Album / Title / Artist
/ Year does not
display or display
correctly (Music)
Duration time does
not display or display
correctly (Music)
If "Auto
Demonstration"
starts when
watching TV
This is not a malfunction
When the TV is turned on, it will take approx. 18 seconds to properly

produce picture and sound.
When the TV is turned on by plugging to the AC outlet, it will take

approx. 15 seconds until the TV is ready to receive any commands
from the remote.
Basics Advanced
Actions
Make sure to use ID3v1 tag.

Duration time cannot be calculated for MP3

that contains the artwork.
The duration time is calculated from the bit

rate and the file size, the time displayed may
differ from the actual playback time. Higher
the compression rate and lower the bit rate
/ sample rate is these error margins will be
greater.
Set "Auto Demonstration" to "Off". (P.34)

Etc.